响应面法优化制备LDHs-CRMA复合改性沥青及其表征

采用熔融共混法，以克拉玛依90^#沥青为原料，Mg-Al水滑石(LDHs)与废橡胶粉(CR)作为改性剂，制备了具有抗紫外老化性能的水滑石/废胶粉复合改性沥青(LDHs/CRMA)，并对其软化点、针入度指数(PI)、延度进行了测试。通过Hassan数学方法将三个指标“归一化”得到总评“归一值”，采用响应面分析法建立总评“归一值”与各因素之间的Box-Behnken数学模型，得到了LDHs/CRMA的最优制备工艺条件为：剪切温度173℃、剪切时间89 min、剪切速率3500 r/min。通过紫外老化模拟实验对复合改性沥青的抗老化性能进行了评价，结果表明，引入水滑石可以减少沥青老化过程中含氧官能团的产生，抗紫外老化性能得到了明显提高。     

Band-gap-tunable CeO2 nanoparticles for room-temperature NH3 gas sensors

NH₃ is a type of essential raw material but harmful. In this work, CeO₂ nanoparticles were synthesized as NH₃ gas sensing materials by simple hydrothermal method. The response time of the sensor is extremely fast (3 s) towards 500 ppm NH₃ with the response of 22.0 at room temperature. The concentration of NH₃ and its response show well-matched functional relationship in the range of 0.5 ppm-1000 ppm. The selectivity of NH₃ is distinct and the detection limit is as low as 500 ppb. The excellent NH₃ gas sensing performance may be attributed to more oxygen vacancies and narrower band gap. This CeO₂ nanoparticles-based gas sensor could be reliable to detect and monitor NH₃ at room temperature.     

中高压变频器冷却方案比较和选型分析

随着电力电子器件的发展,性能优异的中高压变频器在各行各业中得到越来越广泛的应用,能否处理好变频器的散热问题是其长期稳定运行的关键。分析了中高压变频器热量产生来源,并从技术可行性、可靠性、经济性等角度对不同冷却方案的特点进行比较,并结合实际的工程案例,给出合理的变频器冷却方案选型建议,可作为工程电气设计时中高压变频器冷却方案选型参考。     

Optimising clarification of carrot juice by bacterial crude pectinase

This study was undertaken to search for potential use of crude bacterial pectinase enzyme produced from Bacillus subtilis grown on hazelnut shell hydrolysate in clarification of carrot juice and to optimize the enzyme load, pH and time using the Box–Behnken response surface methodology (RSM). The carrot juice was treated with the crude pectinase enzyme (5.60 U mL^?1) at different concentrations (0.1–0.5%), pH (4–7), and time (2–6 h). The obtained enzyme was also compared with commercial fungal pectinase at identical conditions. RSM provided optimal clarification conditions of 0.5% (w/v) enzyme load, 7.0 pH, and 6 h of time estimating 100% clarity, whose experimental counterpart was 94.47 ± 0.01%. High values of coefficient of determination (R² = 0.9631), predicted R² (0.8989) and insignificant lack‐of‐fit (0.12) also showed that the model was successful in predicting % clarity for various combinations. This study also indicated that crude bacterial pectinase providing about 95% clarity is superior to commercial fungal pectinase, which gave 78% clarity under tested conditions, in terms of clarification ability for carrot juice.     

Optimal Pricing Algorithm in the Electricity Market with Battery and Accumulator and Demand–Supply Balancing

This paper considers the day‐ahead market with batteries and accumulators to level power generation. First, we model consumers with batteries, generators with batteries, and accumulators, all of whom strive to maximize their own profit. An optimal pricing algorithm based on dual decomposition and the steepest descent method is derived and shown to be stable. Finally, the effectiveness of the algorithm is demonstrated by means of numerical simulations which indicate that it achieves demand–supply balance.     

Optimal siting and sizing of demand response in a transmission constrained system with high wind penetration

This paper describes algorithms that use demand-side management to address large-scale integration of wind power. In particular, demand response (DR) is used to manage wind power intermittency by shifting the time that electrical power system loads occur in response to real-time prices and wind availability. An economic dispatch with transmission, DR capacity and operational constraints is used to model the operation of a transmission constrained system with a high penetration of wind power. This optimization model is used to determine the optimal sizing and distribution of DR given a fixed budget for customer incentives and the installation of enabling technology. We demonstrate the effectiveness of the operational model based on a simple PJM 5-bus system and an IEEE 118-bus system. Simulation results show that transmission constraints have a greater effect on sizing of DR capacity than the location of wind power, which means that buses electrically close to congested lines tend to have higher incentives to deploy DR resources than other buses. The second part of the work examines optimal siting of technology that enables DR based on the frequency of DR based load changes, which are generally a function of the network location.     

Optimisation of process parameters to develop nutritionally rich spray‐dried honey powder with vitamin C content and antioxidant properties

The aim of present research was to optimise the conditions to develop nutritionally rich honey powder using honey, whey protein concentrate (WPC), aonla (Emblica officinalis. Gaertn) and basil (Ocimum sanctum) extract with the help of co‐current spray drier. Response surface methodology was applied to study the effects of inlet temperature (160–180 °C), whey protein concentrate (25–35%), feed flow rate (0.08–0.13 mL s^?1), aonla extract (6–8%) and basil extract (6–8%) on product responses, viz. bulk density, hygroscopicity, antioxidant activity (AOA), total phenolic content (TPC) and vitamin C. Statistical analysis revealed that independent variables significantly affected all the responses. The results demonstrated that increasing inlet temperature lowered the bulk density, hygroscopicity, AOA, TPC and vitamin C, whereas addition of aonla extract and basil extract increased the AOA (82.73%), TPC (63.27%) and total vitamin C content (94.89%) as these functional compounds were encapsulated by WPC. Similarly, with increase in feed flow rate and WPC, there was increase and decrease in the bulk density and hygroscopicity, respectively. The recommended optimum spray‐drying conditions were inlet air temperature (170 °C), feed rate (0.11 mL s^?1), whey protein concentrate (35%), aonla (8%) and basil extract (6%).     

Rogowski coil current transducer compensation method for harmonic active power error

In the harmonic active power measurement, the highest uncertainties are generally introduced by the current and voltage transducers. In a previous paper, the authors showed that the current transformer (CT) can introduce significant errors in such measurement, especially if the phase shift between voltage and current is close to ±90°. In such condition the errors on harmonic power measurement are mainly due to the CT phase displacement. This paper shows that better results can be achieved with more linear transducers, such as the Rogowski coil current transducers (RCCTs), whose metrological performance in distorted condition can be improved, by means of a proper compensation method. The proposed method for RCCTs compensation is based on the frequency response and it allows to reduce the errors on harmonic power measurement, also for phase shift close to ±90°. The study is supported by several experimental tests.     

Optimized PI+ load–frequency controller using BWNN approach for an interconnected reheat power system with RFB and hydrogen electrolyser units

This paper investigates a renewable energy resource’s application to the Load–Frequency Control of interconnected power system. The Proportional-Integral (PI) controllers are replaced with Proportional-Integral Plus (PI+) controllers in a two area interconnected thermal power system without/with the fast acting energy storage devices and are designed based on Control Performance Standards (CPS) using conventional/Beta Wavelet Neural Network (BWNN) approaches. The energy storing devices Hydrogen generative Aqua Electroliser (HAE) with Fuel cell and Redox Flow Battery (RFB) are incorporated to the two area interconnected thermal power system to efficiently damp out the electromechanical oscillations in the power system because of their inherent efficient storage capacity in addition to the kinetic energy of the generator rotor, which can share the sudden changes in power requirements. The system was simulated and the frequency deviations in area 1 and area 2 and tie-line power deviations for 5% step- load disturbance in area 1 are obtained. The comparison of frequency deviations and tie-line power deviations of the two area interconnected thermal power system with HAE and RFB designed with BWNN controller reveals that the PI+ controller designed using BWNN approach is found to be superior than that of output response obtained using PI+ controller. Moreover the BWNN based PI+ controller exhibits a better transient and steady state response for the interconnected power system with Hydrogen generative Aqua Electroliser (AE) unit than that of the system with Redox Flow Battery (RFB) unit.